Cleaning and maintenance
NL
2.
Open the service door.
5.
Replace the pump cover and screw it
on. The handle must be in a vertical
position.
3.
Remove the drain hose from the
holder. Remove the cap and allow the
water to flow into a suitable
container.
Replace the sealing cap and place
the drain hose back in the holder.
6.
Close the service door.
Note:
To prevent unused detergent from
flowing directly into the drain during the
next wash: pour 1 liter of water into
Compartment II and start it
Drain
program.
4.
Carefully unscrew the pump cover;
residual water may leak out. Clean
the inside, the
threads of the pump cover and the
pump housing. The impeller in the
drain pump must be able to rotate.
The drain hose at the siphon is
clogged
1.
Turn the program selector to YOU
(From).
Remove the plug from
the socket.
2.
Loosen the hose clamp. Carefully
remove the drain hose; residual water
can escape.
47
