Siemens WMH4Y8S9DN Скачать руководство пользователя

Страница: 68 / 76

Faults and what to do about them.

Faults and what to do about them.

Drum care

information:

This instruction reminds you to run the

Drum clean 90 °C

programme or a 60 °C

programme to clean and care for the drum and the outer tub.

Notes

■

Run the programme without laundry.

■

Use washing powder or a detergent that contains bleach. To prevent foaming,

only use half the amount of detergent recommended by the detergent

manufacturer. Do not use detergents that are intended for woollens or

delicates.

■

Switch reminder information on/off.

}

Remote start selected.

Off

: Wi-Fi is switched off and the appliance is not connected to your home network.

Flashing

: The appliance is trying to connect to your home network.

Lit

: Wi-Fi is switched on and the appliance is connected to your home network.

Other displays

Error E:XXX

Switch off the appliance, wait for five seconds and then switch it on again. If the dis-

play appears again, call the after-sales service.

Faults

Cause/remedy

Water is leaking from the

machine.

■

Attach the drain hose correctly or replace it.

■

Tighten the threaded joint on the supply hose.

The appliance is not filling

with water.

■

Have you pressed the

button?

■

Is the tap turned on?

■

Could the filter be clogged? Clean the filter.

■

Is the supply hose kinked or trapped?

The dispenser is empty

and the fill level indicator

is not flashing.

■

Is the drawer cover/connector dirty? Cleaning

Page 50

■

Has the detergent drawer been pushed in correctly? Insert correctly.

Page 63

The wrong detergent/

fabric softener has been

poured into the

dispenser(s).

Dispenser(s):

Empty and clean.

Refill.

Page 48

Detergent/fabric softener

has congealed in the

dispensers.

Clean and refill the dispensers.

The door will not open.

■

The safety function is activated. Stop the programme?

Page 45

■

Is the

childproof lock activated? Deactivate.

Page 44

■

selected (Rinse Stop = no final spin)?

Page 45

■

Can the door only be opened by the emergency release?

Page 66

The programme does not

start.

■

Have you pressed the

Ready in

button?

■

Is the door closed?

■

Is the

childproof lock activated? Deactivate.

Page 44

Display

Cause/remedy

Содержание WMH4Y8S9DN













































































Результаты поиска

Содержание WMH4Y8S9DN

Отзывы:

Похожие инструкции для WMH4Y8S9DN

Бренды по названию

Популярные бренды

Siemens WMH4Y8S9DN, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WMH4Y8S9DN

Отзывы:

Похожие инструкции для WMH4Y8S9DN

Бренды по названию

Популярные бренды