Siemens WM6HXKO0DN, Руководство пользователя и инструкции по установке

Страница: 55 / 72

Troubleshooting
en
55
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting in-
formation before contacting Customer Service. This will avoid unnecessary costs.
WARNING
Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out by trained specialist staff.
▶
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the manu-
facturer, the manufacturer's Customer Service or a similarly qualified person in
order to prevent any risk.
Error code / Fault display / Signal
Errors Cause Troubleshooting
The display goes out and ⁠
flashes.
Energy-saving mode is active
▶
Press any button.
a The symbol lights up again.
"E:30 / -80" Drain pipe or water outlet
hose is blocked.
▶
Clean the drain pipe and the water
outlet hose.
Drain pipe or water drain hose
is caught or jammed.
▶
Ensure that the drain pipe and water
drain hose are not kinked or trapped.
Drain pump is blocked.
▶
→ "Cleaning the drain pump",
Page 50
The water outlet hose is con-
nected too high.
▶
Install the water outlet hose at a max-
imum height of 1 metre.
→
"Technical specifications",
Page 69
"E:36 / -25 / -26" Drain pump is blocked.
▶
→
"Cleaning the drain pump",
Page 50
"E:10 / -00 / -10 / -20" The pump for the intelligent
dosing system is blocked.
1.
Switch off the appliance.
2.
Clean the pump unit.
→
"Cleaning the detergent drawer",
Page 48
3.
If this indicator appears again, call
our after-sales service.
→
"Customer Service", Page 66
Note:
You can start the washing pro-
gramme if you deactivate the intelligent
dosing system and dose manually.
→
"Buttons", Page 29