Siemens WM6HXE0LDN, Руководство пользователя и инструкции по сборке

Страница: 63 / 76

Troubleshooting
en
63
Malfunctions
Fault Cause troubleshooting
The appliance is not work-
ing. The mains plug of the power
cord is not plugged in.
▶
Connect the appliance to the power
supply.
The circuit breaker is faulty.
▶
Check the circuit breaker in the
fuse box.
There has been a power cut.
▶
Check whether the lighting in your
kitchen or other appliances are
working.
The programme does not
start. You have not pressed .
▶
Press .
Door is not closed.
1.
Close the door.
2.
Press to start the programme.
Childproof lock is activated.
▶
→
"Deactivating the childproof
lock", Page 46
is activated.
▶
Check whether is activated.
→
"Buttons", Page 26
Laundry is caught in the
door.
1.
Open the door again.
2.
Remove any trapped laundry.
3.
Close the door.
4.
Press to start the programme.
The detergent drawer has
not been pushed in as far as
it can go.
▶
Push the detergent drawer in as far
as it will go.
The pump for the intelligent
dosing system is blocked.
1.
Switch off the appliance.
2.
Clean the pump unit.
→ "Cleaning the detergent drawer",
Page 54
3.
If this indicator appears again, call
our after-sales service.
→
"Customer Service", Page 72
Note: You can start the washing pro-
gramme if you deactivate the intelli-
gent dosing system and dose manu-
ally.
→
"Buttons", Page 26
The door cannot be opened. Rinse Hold is activated.
▶
Continue the programme by select-
ing
Spin or Drain and pressing
.
→ "Resuming the programme when
the programme status is Rinse
Hold", Page 45