Installation and connection
en
17
1.
Unscrew and remove the screws in
the vertical transport struts using a
T20 screwdriver.
2.
Remove the transport struts.
3.
Undo and remove the screws in
the horizontal transport strut using
a T20 screwdriver.
4.
Remove the transport strut.
Connecting the appliance
Connect your appliance to the power
supply, water inlet and water outlet.
Connecting the water inlet hose
Note:
Please read the information in
the "Safety" →
sec-
tions to ensure that you use the appli-
ance safely.
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
▶
Do not immerse the electrical
AquaStop valve in water.
1.
Connect the water inlet hose to a
tap (26.4 mm = 3/4").
¾˝
min.
min.
10 mm
17 mm
¾˝
min.
10 mm
2.
When connecting to a 21 mm = ½"
tap, first fit the adapter with a seal-
ing washer.