Siemens WM16Y750DN, Инструкция по эксплуатации и руководство по установке

Страница: 31 / 60

31
Appliance settings
By pressing the
Â
3 sec
(Basic Setting 3 sec.) buttons, appliance
settings can be changed, e.g. button signal.
Simultaneously hold down
Â
3 sec (Basic Setting 3 sec.) buttons
for approx. 3 seconds:
Ø
If the buttons are held down, the settings automatically run
through.
Ø
Select Setting with the two left buttons.
Ø
Select displayed value with the two right buttons (selection
acknowledged by a tick).
Ø
Wait or hold down
Â
3 sec
(Basic Setting 3 sec.) buttons
again.
²
Settings are retained after appliance is switched off.
Language
end signal
off
è
button signal
b c b c
Settings Set values Notes
end signal off – quiet – medium –
loud – very loud Adjust volume of the end signal.
button signal off – quiet – medium –
loud – very loud Adjust volume of the button signals.
Auto power-
off of the
appliance in 15 – 30 – 60 min –
never The appliance automatically switches off after ...
min. (= 0 kWh energy consumption); to switch
on, press main switch button
#
.
language German
GB English
... Change displayed language.