usage
NL
g
6
use
aThe display shows the remaining
program duration.
aAfter the program end, it shows
display: -0- .
Before first use
g
B
use
prepare the device for use.
8.
Start the first wash cycle or press to
switch off the appliance.
6.1 Start the wash cycle
without laundry
Your device has been thoroughly
checked before leaving the factory. To
remove any residual water, wash
without any laundry the first time.
1.
Press .
The power-on process takes a few
seconds.
2.
The programCleaning the drum
Set up.
3.
Close the door.
4.
Pull out the detergent drawer.
5.
Put the powder detergent in the
manual dosing compartment.
To avoid foaming, use only half the
amount recommended by the
detergent manufacturer for light
soiling. Do not use wool or delicate
detergent.
6.
Slide the detergent drawer into the appliance
ready.
7.
To the program Start/
Refill
to start, on
to press.
21
