Additional programme settings
en
37
After starting the programme
, you can
add or remove laundry if necessary.
\
Additional programme
settings
Additional programme settings
An overview of all additional settings,
which can be selected depending on
the programme, can be found from
speedPerfect
G
Washing in a shorter time while
achieving a washing result that is
consistent with, but uses more energy
than, the selected programme, without
the speedPerfect
G
setting.
Note:
Do not exceed the maximum
load.
ecoPerfect
¦
Energy-optimised washing by reducing
the temperature while achieving a
washing result that is consistent with the
selected programme, without the
ecoPerfect
¦
setting.
Prewash
!
For heavily soiled laundry.
Note:
Pour detergent into
compartments
I
and
II
.
Extra Rinse
l
Additional rinse cycle for particularly
sensitive skin and/or for areas with very
soft water.
Less Ironing
æ
Reduces creasing thanks to a special
spin sequence followed by fluffing and
reduced spin speed.
Note:
The washing's residual moisture
is increased.
sensoFresh Intensity
î
The intensity of the active oxygen
treatment can be set at 2 levels:
1
Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note:
The washing machine
must be
correctly installed
and
connected
.
From
1.
Connect the mains plug.
2.
Turn on the tap.
3.
Open the door.
4.
Check that the drum is completely
drained. Drain if necessary.
Ù
normal; for light odours
Ú
intensive; for strong odours
(cigarettes, kitchen odours)