Siemens WM14W790IL Скачать руководство пользователя

Страница: 34 / 56

Programme default settings

Starching

Note:

Laundry should not be treated

with fabric softener.

Liquid starch can be used to stiffen

fabrics particularly in the Rinse and

Cottons programmes. Measure starch

into compartment

in accordance with

the manufacturer's instructions (clean

first if necessary).

Dyeing/bleaching

Dye should only be used in normal

household quantities. Salt may damage

stainless steel. Always follow the dye

manufacturer's instructions.
Do

not

use the washing machine to

bleach clothes.

Soaking

Switch on the appliance.

Select the

Cottons

30 °C

programme.

Pour soaking agent/detergent into

compartment

in accordance with

the manufacturer’s instructions.

Press the

button. The programme

starts.

After approx. 10 minutes, press the

button to pause the programme.

Leave the laundry to soak for as long

as required, then either press the

button again to continue the

programme or change the

programme.

Notes

■

Load laundry of the same colour.

■

No additional detergent is required;

the soaking solution is used for

washing.

Programme default

settings

Programme default settings

The default programme settings are

displayed in the display panel after

selecting the programme.
You can change the default settings.
An overview of all programme settings,

which can be selected depending on

the programme, can be found from

Page 29

Temperature

(Temp. °C)
Depending on what stage the

programme is in, you can change the

set temperature before and during the

programme.
The maximum temperature that can be

set depends on the programme that has

been selected.

Spin speed

(Spin

)

Depending on what stage the

programme is in, you can change the

spin speed (in rpm; revolutions per

minute) before and during the

programme.

Setting 0

: The rinsing water is drained

but there is no final spin. The laundry

stays wet inside the drum, e.g. for items

that should not be spun.

Setting

: Rinse Stop = no final spin.

The laundry stays in the water after the

final rinse.
You can select “Rinse Stop” to prevent

creasing if the laundry will not be taken

out of the washing machine immediately

after the programme has ended.
To continue/end the programme

Page 40

Содержание WM14W790IL

























































Результаты поиска

Содержание WM14W790IL

Отзывы:

Похожие инструкции для WM14W790IL

Бренды по названию

Популярные бренды

Siemens WM14W790IL, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание WM14W790IL

Отзывы:

Похожие инструкции для WM14W790IL

Бренды по названию

Популярные бренды