Siemens WM14W768DN Скачать руководство пользователя страница 41

Страница: 41 / 56

Operating the appliance

Changing the programme

If you have started the wrong

programme by mistake, you can

change the programme as follows:

Press the

button.

Select another programme.

Press the

button. The new

programme starts from the

beginning.

Note:

When switching from

programmes that use active oxygen to

those that do not, the door will remain

locked for up to 25 minutes until there

is no longer any active oxygen in the

drum.

The

and

symbols will flash. If the

symbols are off, the door can be

opened.

Cancel the programme

For programmes at high temperatures:

Press the

button.

To cool down laundry: Select

Rinse

Press the

button.

For programmes at low temperatures:

Press the

button.

Select

Spin

Empty

Press the

button.

Note:

When cancelling programmes

that use active oxygen, the door will

remain locked for up to 25 minutes until

there is no longer any active oxygen in

the drum.

Switch the appliance on again if

necessary. The

and

symbols will

flash. If the symbols are off, the door

can be opened.

Programme end during rinse

hold

In the display panel,

flashes, and the

preset spin speed and remaining

programme length are displayed for the

selected programme.

Continue the programme by:

■

Pressing the

button or

■

Changing the spin speed, or setting

the programme selector to

Empty

and then pressing the

button.

Programme end

- 0 - and

appear in the display panel.

The

button indicator lamp is off.

Содержание WM14W768DN

























































Результаты поиска

Содержание WM14W768DN

Отзывы:

Похожие инструкции для WM14W768DN

Бренды по названию

Популярные бренды

Siemens WM14W768DN, Инструкция по эксплуатации и монтажу

Результаты поиска

Содержание WM14W768DN

Отзывы:

Похожие инструкции для WM14W768DN

Бренды по названию

Популярные бренды