Declaration of Conformity NL
mains voltage
220 - 240V,
50 Hz
Further information about your model
can be found on the Internet at https://
This web
address contains a link to the official EU
product database EPREL, the URL of
which had not yet been published at the
time of printing. Then follow the
instructions when searching for the
model. The model identification consists
of the slash character of the E number
(E-No.) on the rating plate. Alternatively,
you can also find the model
identification in the first line of the EU
energy label.
Minimum input
installation fuse
10 A
2300W
Rated power
gene
Recorded Ver-
to be allowed to
¡ Off state:
0.10W
¡ non-disabled
caved in
position: 0.50 W
¡ Time to the net
work-related
standby becomes
set (Wi-Fi
Fi): 5 min
¡ network
unions standing
by (WiFi):
1.50 W
C
2
declaration of non-compliance
3 Declaration of Conformity
ring
C
BSH Hausgeräte GmbH hereby
declares that the appliance with Home
Connect functionality complies with
the basic requirements and other
applicable provisions of Directive
2014/53/EU.
A detailed RED Declaration of Conformity
can be found on the Internet at
www.siemens-home.bsh-group.com on
the product page of your appliance in the
additional documents.
declaration of non-compliance
water pressure
¡ Minimum:
100 kPa
(1 bar)
¡ Maximum:
1000 kPa
(10 bar)
Length of the
water supply
feeding hose
150 cm
Length of the
water drain hose
150 cm
160 cm
Length of the
mains connection cable
2.4 GHz band: 100 mW max. 5
GHz band: 100 mW max.
1
Depending on the device version
This product contains light sources of
energy class F. The light sources are
available as spare parts and may only
be replaced by a trained technician.
1
Only applies to countries in the European Economic Area
71
