Siemens WM14VG43, Руководство пользователя и инструкции по установке

Страница: 34 / 60

en
operation
34
13.7 Use the measuring aid
for liquid detergent
To add liquid detergent, you can use
a measuring aid in the detergent
drawer.
1.
Pull out the detergent drawer.
2.
Slide the measuring aid forwards.
3.
Fold the measuring aid down and
click it into place.
4.
Push in the detergent drawer.
13.8 Adding detergent and
care product
Notes
¡
Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡
Observe the information about de-
tergents and care products
→
Page 32 .
1.
Pull out the detergent drawer.
2.
Pour in detergent.
→
"Detergent drawer", Page 18
3.
If required, add the care product.
4.
Push in the detergent drawer.
13.9 Starting the programme
Note:
If you want to change the time
until the programme ends, set the
"Ready in" time first.
▶
Press
Start/Nachlegen
.
a
The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a
The display shows either the pro-
gramme duration or the "Ready in"
time.
13.10 Adding laundry
1.
Press
Start/Nachlegen
.
The appliance pauses.
2.
Open the appliance door.
3.
Add or remove laundry.
4.
Close the appliance door.
5.
Press
Start/Nachlegen
.
13.11 Cancelling the pro-
gramme
1.
Press
Start/Nachlegen
.
2.
Open the appliance door.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the
Rinse/Freshen Up
pro-
gramme.
– If the water level is high, start
the
Spin
programme or select a
suitable programme for draining.
→
"Programmes", Page 27
3.
Remove the laundry → Page 35 .