Home Connect
en
39
Note:
If you are not able to establish a
connection, check whether your
appliance is within range of your home
network. Try connecting manually again.
Connecting to the Home Connect app
Step 3
If your appliance is connected to your
home network, you can connect it to the
Home Connect app.
Ensure that you are in the Home
Connect menu.
Make sure that you have opened the
Home Connect app and are logged in.
1.
Press
Settings
.
2.
Press
Connect with app
.
The appliance now attempts to connect
to the Home Connect app.
3.
Once your appliance is displayed in
the app, carry out the last steps in
the Home Connect app.
4.
Confirm the message in the display.
Note:
If you were not able to establish
a connection, check whether your
mobile end device is within range of
your home network or is connected to
this. Try connecting to the
Home Connect app again.
Energy management
You can connect your appliance to your
smart energy system (Energy manager).
Once you have connected your
appliance to the smart energy system
(Energy manager) and activated the
Flex start
function, you will be able to
optimise your energy consumption
because your appliance will not start up
until your home photovoltaic system can
provide sufficient energy or the energy
tariff is good.
Further information and system
requirements for using the Energy
manager can be found at:
www.home-
connect.com/energymanagement
Notes
■
The smart energy system (Energy
manager) must use the EEBus
initiative communications standard.
■
Before you start, read the smart
energy system instruction manual to
find out how to connect your
appliance to the smart energy
system (Energy manager).
1.
Press
à
.
2.
Press
Connect with energy
manager
.
Your appliance now attempts to
connect to the smart energy system
(energy manager). If the appliance
has connected successfully,
Your
home appliance is connected to
your energy manager.
appears in
the display.
3.
Press
Continue
.
4.
Activate Flexstart if you want the
smart energy system (Energy
manager) to start up your appliance.
Status
View the status of your connection to
the home network, to the app and to the
energy manager (depending on the
appliance features).
Ensure that you are in the Home
Press
Status
.
Activating/deactivating Wi-Fi
If your appliance is already connected
to your home network, you can activate
or deactivate
Wi-Fi
on your appliance.
Ensure that you are in the Home
Press
Wi-Fi
.