en
Positioning and connecting
20
Transportation
e.g. when moving home
Preparatory work:
1.
Turn off the water tap.
2.
Reduce the water pressure in the
supply hose.
3.
Drain any residual water.
4.
Disconnect the appliance from the
mains.
5.
Remove the hoses.
6.
Installing the transport locks:
1.
Remove the covers and keep them
in a safe place.
Note:
Use a screwdriver if
necessary.
2.
Insert all four sleeves.
a) Clip the hoses securely in the
holders.
b) Clip the mains cable securely in
the holders.
c) Insert and tighten the screws.
Before switching on the appliance
again:
Notes
■
The support struts
must
be
removed.
■
The transport braces
must
be
removed.
"Removing the transport locks"
■
Pour approx. 1 litre of water into the
dispenser for manual dosing, select
the
Rinse
,
Spin
or
Drain
programme
and start. This will prevent detergent
from flowing straight into the drain
during the next wash.
