Positioning and connecting
en
13
5
Positioning and
connecting
Positioning and connecting
Standard accessories
Note:
Check the appliance for transport
damage. Never use a damaged
appliance. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
Customer Service.
In addition
, a hose clamp (24 - 40 mm
diameter, available from specialist
retailers) is required to connect the
water outlet hose to a siphon.
Useful tool
■
Spirit level for aligning
■
Wrench with:
– WAF13 for loosening the
transport braces and
– WAF17 for aligning the appliance
A
Mains lead
B
Bag:
■
Installation and operating
instructions
■
Customer Service location
directory*
■
Warranty*
■
Supplementary sheet for the
installation and operating
instructions*
■
Cover caps for openings after
the transport braces have
been removed
■
Home Connect Installation
Guides*
C
Water inlet hose on aquaStop
models
D
Water outlet hose
E
Elbow for securing the water
outlet hose*
F
Cold water inlet hose on
Standard/Aqua-Secure models
*
Depending on the model