Siemens WM14T660ME, Инструкция по эксплуатации и руководство по установке

Страница: 19 / 44

Programme default settings
en
19
Finish in
0
Before starting the programme
, you
can preselect the programme end
("Ready in" time) in hourly increments (h
= hour) up to a maximum of 24 hours.
To do this:
1.
Select a programme.
The programme duration is
displayed for the selected
programme, e.g.
2:30
(hours:minutes).
2.
Press the
Finish in
0
button
repeatedly until the required number
of hours is displayed.
Note:
The setting values are
increased using the
Finish in
0
+
button, and decreased using the
Finish in
0
-
button.
3.
Press the
Ü
button.
The programme starts.
The selected number of hours (e.g.
8
h
) is shown in the display panel and
counts down until the wash
programme starts. The duration of
the programme is then displayed.
Note:
The length of the programme is
automatically adjusted when the
programme is running. Changes to the
default programme settings or
programme settings may also change
the programme duration.
After starting the programme
(if a
Finish in
0
time has been selected and
the wash programme has not yet
started), you can change the
preselected number of hours as follows:
1.
Press the
Ü
button.
2.
Use the
Finish in
0
-
or
+
button to
change the number of hours.
3.
Press the
Ü
button.
After starting the programme
, you can
add or remove laundry if necessary.
~
Page 23
i-Dos settings
Your washing machine has an intelligent
dosing system for liquid detergent and
fabric softener.
The washing machine doses your
detergent and fabric softener
automatically in most programmes.
~
Page 14
The following have been preset at the
factory:
■
i-Dos
Ó
:
¨
Detergent dosage for lightly soiled
laundry
■
i-Dos
i
:
©
Fabric softener dosage for a
medium level of softness
i-Dos
Ó
for detergent
Dosage strengths
You can change the settings for
automatic detergent dosage before the
programme starts. You can find
information on degrees of soiling on
~
Page 13
i-Dos
i
for fabric softener
Dosage strengths
Depending on what stage the
programme is in, you can change the
settings for automatic detergent
dosage.
ª
High: heavy soiling and staining
©
Medium: average soiling
¨
Low: light soiling
ö
Automatic dosage deselected,
manual dosage
~
Page 26
ª
High: high level of softness
©
Medium: medium level of softness
¨
Low: low level of softness
ö
Automatic dosage deselected