en
Installation and connection
14
3.
Pull the power cable out of the
holder.
4.
Remove the 4 sleeves.
5.
Put on the 4 cover caps.
6.
Press down on the 4 cover caps.
4.5 Connecting the appliance
Connecting the water inlet hose
WARNING
Risk of electric shock!
The appliance contains live parts.
Touching live parts is dangerous.
▶
Do not immerse the electrical
AquaStop valve in water.
1.
Connect the water inlet hose to a
tap (26.4 mm = 3/4").
2.
Open the water tap carefully and
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.