Additional programme settings
en
17
4.
Press the
Start
/Reload button. The
preselected time continues to run.
\
Additional programme
settings
Additional programme settings
G
speed
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note:
Do not exceed the maximum
load.
¦
eco
For saving energy with a washing result
comparable to that of the standard
programme.
z
Water Plus
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for further
enhancing the spin result.
1
Operating the
appliance
Operating the appliance
Preparing the washing
machine
Note:
The washing machine
must be
correctly installed
and
connected
.
From
1.
Connect the mains plug.
2.
Turn on the water tap.
3.
Open the door.
4.
Check that the drum is completely
drained. Drain if necessary.
Select programme/switch on
the appliance
Note:
If you have activated the
childproof lock, you must first deactivate
it before you can set a programme.
Use the programme selector to select
the required programme. Can be turned
in either direction.
The machine is switched on.
The display panel shows the following
information consecutively for the
selected programme:
■
The programme duration,
■
The preset temperature,
■
The preset spin speed and
■
The maximum load.
Change the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
Programme default settings
Overview of programmes from
