Additional programme settings
en
15
Starching
Note:
Laundry shall not be treated with
fabric softener.
Starching is possible in all wash
programmes if liquid starch is used.
Measure starch into compartment
M
in
accordance with the manufacturer's
instructions (clean first if necessary).
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do
not
use the washing machine to
bleach clothes.
Soaking
1.
Pour soaking agent/detergent into
compartment
II
in accordance with
the manufacturer's instructions.
2.
Select desired programme.
3.
Press
Start
/Pause
!
.
4.
After approx. ten minutes, press
Start/
Pause
!
.
5.
After the required soaking time,
press
Start
/Pause
!
again to
continue or change the programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required;
the soaking solution is used for
washing.
\
Additional programme
settings
Additional programme settings
Extra Rinse
l
Increased water level and additional
rinse cycle, extended washing time. For
areas with very soft water or for further
enhancing the spin result.
Quick Wash
~
For washing in a shorter time with a
washing result comparable to that of the
standard programme.
Note:
Do not exceed the maximum
load.
Overview of programmes
p
Drain
Drain of the rinsing water
-
-
-
-
Programme/type of laundry/information
Settings/Presettings of the pro-
grammes are highlighted in bold
