en
Programme default settings
14
Soaking
1.
Pour soaking agent/detergent into
compartment
II
in accordance with
the manufacturer's instructions.
2.
Turn the programme selector to
Cottons 30 °C
programme.
3.
Press the
Start
/Reload button.
4.
After approx. 10 minutes, press
Start/
Reload
.
5.
After the required soaking time,
press
Start
/Reload again to
continue or change the programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required;
the soaking solution is used for
washing.
0
Programme default
settings
Programme default settings
0
Spin speed
Before and while the selected
programme is running, the spin speed
or
$
(without final spin, laundry soaks
in the last rinsing water, display panel - -
-) can be set. The effects depend on
the programme progress.
The maximum selectable spin speed
depends on the model and the set
5
Finished in
When you select the programme, the
relevant programme duration is
displayed.
The programme duration is
automatically adjusted when the
programme is running. Changes to the
programme default settings or
programme settings also change the
programme duration.
Before starting the programme, the
programme end ("Finished in" time) can
be preselected in increments of one
hour (h = hours) up to a maximum of 24
hours.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
Note:
The programme duration is
included in the selected "Finished in"
time.
After the start, the preselected time e.g.
8 h
is displayed and the time counts
down to the start of the washing
programme. The programme duration is
then displayed, e.g.
2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
1.
Press the
Finished in
button
repeatedly until the required number
of hours is displayed.
2.
Press the
Start
/Reload button.
Adding laundry while the preselected
time continues running:
1.
Press Start/
Reload
.
2.
YES
lights up in the display panel.
The washing machine door can be
opened and you can add laundry.
3.
Close the washing machine door.
4.
Press the
Start
/Reload button. The
preselected time continues to run.
