en
Operating the appliance
34
■
Be careful when opening the
detergent drawer while the appliance
is running.
Measuring aid A* for liquid detergent
*depending on the model
Position the measuring aid A for
measuring the correct amount of liquid
detergent:
1.
Pull out the detergent drawer. Insert
the liquid detergent container into
dispenser
II
for main wash.
2.
Pour liquid detergent into liquid
detergent container and do not
exceed the Maximum mark.
3.
Close the detergent drawer.
Note:
Do not use the viscous liquid
detergent.
Starting the programme
Touch and hold
I
Start/Reload
button for 1~2 seconds, then release
the button. The programme starts and
the appliance door is locked.
The
B
Finish in
is shown in the display
panel and counts down until the
programme starts. After the programme
has started, the programme duration is
displayed. And the symbols for the
programme progress are lighting up.
Childproof lock
You can lock the appliance to prevent
the settings you have set from being
changed inadvertently. To do this,
activate the childproof lock.
To activate the childproof lock:
After the programme starts, Touch and
hold the
B
Finish in
and
(
varioSpeed
buttons for 3 seconds. The
symbol
w
lights up in the display
panel.
■
w
lights up: The childproof lock is
activated.
■
w
flashes: If the programme and
programme settings are adjusted
while childproof lock is activated.
Note:
When the programme ends,
End
is displayed. The door is unlocked.
w
symbol remain on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch and hold the
B
Finish in
and
(
varioSpeed
buttons until the symbol
w
disappears.
Adding/removing laundry
After starting the programme, you can
add or remove laundry if necessary.
Touch the
I
Start/Reload
button. The
appliance checks whether reloading is
possible.
If the following appears on the display
panel:
■
The symbol
Õ
disappears,
reloading is possible.
■
The symbol
Õ
lights up, reloading is
not possible.
To continue the programme, touch the
I
Start/Reload
button. The
programme continues automatically.