Installation and connection
en
15
6.
Press down on the four cover
caps.
4.5 Connecting the appliance
Connecting the water inlet hose
Note
¡
Please read the information in the
Safety →
sec-
tions to ensure that you use the
appliance safely.
1.
Connect the water inlet hose.
2
1
2.
Connect the water inlet hose to a
tap (26.4 mm = 3/4").
¾˝
min.
min.
10 mm
17 mm
3.
Open the water tap carefully and
check that the connection points
are tight.
Water outlet connection types
This information is intended to help
you to connect this appliance to the
water outlet.
Note:
Please read the information in
the Safety →
sections
to ensure that you use the appliance
safely.
ATTENTION!
When draining, the water outlet hose
is subject to water pressure and may
come loose from the installed con-
nection point.
▶
Secure the water outlet hose
against unintentional loosening.
Note:
Observe the draining heights.
The maximum draining height is
100 cm.
Drainage into a
siphon
Secure the con-
nection point with
a (24–40 mm)
hose clamp.