Installation Instructions
Document No. 563-201
March 12, 2008
WFLN Series
Wireless Field Level Network Transceiver (FLNX)
(Version 2.x)
Item Number 563-201, Rev. CA
Page 1 of 5
Figure 1. Wireless Field Level Network
Transceiver.
Product Description
The Wireless Field Level Network Transceiver
(FLNX) is mounted at or near the FLN device and is
powered by 24 Vac. The antenna can be mounted
directly to the radio or mounted remotely for
installations where the location of the FLNX causes
the antenna to be shielded—for example, when the
FLNX is mounted inside a TEC enclosure.
Product Numbers
563-054
Wireless Field Level Network
Transceiver (FLNX) with WRTS
Support (Version 2.x)
563-007
Direct Mount Antenna
563-008
Remote Mount Antenna
Transceivers do not come with antennas.
Antennas must be ordered separately.
Accessories
563-027
Pre-terminated Cable Kit
Includes two 14 in. (36 cm) cables:
– Power
– Communication
Recommended for factory mounting.
Related Products
Wireless Field Level Network (WFLN)
563-055
Wireless Field Panel
Transceiver (FPX)
563-056
Wireless Transceiver Tool (TLX)
QAA2290.EWSC Wireless TEC Room
Temperature Sensor (WRTS) –
Sensing only
QAA2290.DWSC Wireless TEC Room
Temperature Sensor (WRTS) –
Sensing with Temperature
Display
QAA2290.FWSC
Wireless TEC Room
Temperature Sensor (WRTS) –
Sensing with Override, Setpoint,
and Temperature Display
Warning/Caution Notations
CAUTION:
Equipment damage, or loss of
data may occur if you do not
follow the procedures as
specified.
Expected Installation Time
10 minutes
Required Tools and Materials
•
Electro-static discharge wrist strap
•
Small flat-blade screwdriver
•
Cordless
drill/driver
set
