Siemens WEBUI, Быстрое руководство

Страница: 38 / 72

CONFIGURATION
3-8
SIG-QG-20-02 JANUARY 2021
Version : A.2
3.3.2 GCP Programming 3000+
To edit a field, either select from the drop-down list, or enter a numerical value as appropriate.
Multiple fields on this page can be changed before saving. After the required fields are changed, press
Save to implement the changes. If there are unsaved changes and a new screen is selected, the WebUI
will prompt the user to save or discard the changes.
Figure 3-8 WebUI GCP Programming
Some parameters get hidden based upon the value or other parameters. The hidden parameter is not
visible until the parameter that causes it to be hidden is saved.
For example, the Prime Pickup Delay Mode is only visible when the Prime Prediction Offset is not 0. So,
if the plans indicate to change the Pickup Delay Mode, the Prime Prediction Offset first has to be
changed to a non-zero value and then the changes saved before the Pickup Delay Mode is visible.