Sensors
en
51
H
Sensors
Sensors
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Note:
Place large and small items of
laundry evenly in the drum.
2
Cleaning and
maintenance
Cleaning and maintenance
:
Warning
Risk of death!
There is a risk of electric shock if touch
live components.
Press the button
#
and pull out the
mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
Appliance housing/control
panel
■
Remove the detergent residue
immediately.
■
Wipe the housing and the control
panel with a soft, damp cloth.
■
Do not use abrasive cloths, sponges
or detergents (stainless steel
cleaner).
■
Do not clean the appliance with a
water jet.
Drum
Use chlorine-free cleaning agents, do
not use steel wool.
If there are odours in the appliance, or
to clean the drum, run the
limp. tambor
(Drum Clean) 90°C
programme without
laundry.
Descaling
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from
customer services.
Detergent drawer and housing
If the appliance contains detergent or
fabric softener residues:
1.
Pull out the detergent drawer. Press
down the insert and fully remove the
drawer.
