en
Additional programme settings
38
By selecting additional programme
settings, you can better adapt the
washing/drying process to your items of
laundry.
The settings can be selected or
deselected depending on the progress
of the programme.
The button indicator lamps light up if a
setting is activated.
The settings are not retained after the
appliance is switched off.
(
Speed
Washing/drying in a shorter time while
achieving a washing/drying result that is
consistent with the normal performance.
Touch
(
Speed
to activate or
deactivate this additional programme
setting.
Note:
With the additional
(
Speed
option activated, the maximum washing
load will be reduced, and extra cooling
water will be needed for the drying
process.
s
(Prewash)
Prewash for heavily soiled laundry.
Touch
s
(Prewash)
to activate or
deactivate it.
Note:
Put the detergent into dispenser
I
and
II
.
Ý
(Easy iron)
Reduces creasing by means of a
special spin sequence followed by
fluffing and reduced spin speed.
Touch
Ý
(Easy iron)
and activate or
deactivate it.
Note:
If
Ý
(Easy iron)
has been
activated, the laundry will have retained
a higher than average level of moisture
after spinning.
l
(Rinse plus)
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
z
(Water plus)
Increased water level for gentler
treatment of the laundry.
Touch
z
(Water plus)
to activate or
deactivate it.
â
(Memory)
With memory you can save a selected
programme with your favourite settings.
To store
:
1.
Switch on the appliance.
2.
Select a programme.
3.
If required, change the programme
default settings and/or select
programme additional settings.
4.
Touch and hold
â
(Memory)
button
for approx. three seconds.
The programme is saved if all of the
settings flash briefly.
Calling up
: touch
â
(Memory)
button
briefly after you switch on the appliance.
Reset
: touch and hold
â
(Memory)
button again for approx. three seconds
after selecting the new programme and
settings.
ç
(Silent)
Function designed for noise reduction.
Washing and drying process noise will
be reduced, and ending signal will be
switched off.
Note:
If silent is selected for wash only,
remaining moisture of the laundry will
be slightly increased. The spin result
may not be satisfying. Before hanging
you can select
0
programme to further
reduce moisture.
