Setting the signal
en
27
M
Setting the signal
Setting the signal
1. Activate setting mode for the signal volume
Turn to
$
Off
.
Turn one position
clockwise.
Touch and hold the
°C
(
Temperature
)
turn one position clockwise.
Release the but-
ton, and figure
appears in the
display.
2.a Set the volume for the button signals
Touch the
0
(
Finish in
) button until
the required volume is reached
Go to step 2.b or
Set to
$
Off
, which exits setting mode
for the signal volume.
2.b Selecting the volume for the information signals
Turn one position clockwise.
Touch the
0
(
Finish in
) button
until the required volume is
reached.
Set to
$
Off
, which exits setting
mode for signal volume.
