en
Changing programme default settings
24
Starching
Note:
The laundry should not be
treated with fabric softener.
Liquid starch can be used in all wash
programmes. Pour starch into the
dispenser
M
according to
manufacturer’s specifications
(if required, clean beforehand).
Dyeing/Bleaching
Dye in household quantities only. Salt
may attack stainless steel! Observe
specifications of the dye manufacturer!
Do not
bleach laundry in the washer
dryer!
Soaking
1.
Pour soaking agent/detergent into
compartment
II
in accordance with
the manufacturer's instructions.
2.
Set the programme selector to
Cottons
Î
30°C
programme.
3.
Select
Start
/Reload
!
.
4.
After approx. 10 minutes, select
Start/
Reload
!
.
5.
After the required soaking time,
select
Start
/Reload
!
again to
continue or change the programme.
Notes
■
Load laundry of the same colour.
■
No additional detergent is required;
the soaking solution is used for
washing.
0
Changing programme
default settings
Changing programme default settings
You can change the default settings for
selected programmes. The default
settings can be changed even while the
selected programme is running. The
effects depend on the progress of the
programme.
°C
(Temperature)
(
: The indicated washing
temperature can be changed. The
maximum selectable washing
temperature varies depending on the
selected programme.
Overview of programmes
0
(Spin speed)
0
: The spin speed can be changed
before and during the programme
(in rpm, revolutions per minute)
depending on the progress of the
programme. Setting
– – –
(
Rinse stop
=
without final drain/spin cycle), laundry
remains in the water after the last rinse
cycle. The maximum spin speed
depends on the programme and model.
Overview of programmes
#