Siemens Wallace & Tiernan Chem-Ad VPP, Инструкция по эксплуатации

Страница: 51 / 136

Chem-Ad
®
VPP / VPP-E / VPP-DC
Safety
2.
51
English
2. Safety
2.1 Intended use
Peristaltic metering pumps Chem-Ad
®
VPP, Chem-Ad
®
VPP-E
and Chem-Ad
®
VPP-DC are designed to dose low-viscosity liquid
media that do not contain solid particles.
The pump hose material must be suitable for the pumping
medium; the pump hose must be replaced in good time.
The operational safety of the unit is only guaranteed if it is used in
accordance with its intended purpose. It may only be used under
the operating conditions indicated in the technical specifications.
Compliance with the intended use also includes reading this
instruction manual and observing all the instructions it contains.
Furthermore, all and maintenance work must be performed at the
prescribed intervals.
The operator bears full and sole responsibility if this unit is put to
any use which does not comply strictly and exclusively with this
intended use.
2.2 General safety instructions
Siemens AG places great emphasis on safety when working on or
with the unit. Safety is our guiding principle right from the design
phase; the system is therefore equipped with safety features.
Safety instructions The safety instructions in this documentation must be observed
unconditionally at all times. Additional industry-wide or in-house
safety regulations also continue to apply. National regulations,
such as the accident prevention regulations, must be observed.
Safety instructions on the unit All safety instructions attached to the unit itself must be observed.
These instructions must always be clearly legible and complete.