Siemens VersiCharge Скачать руководство пользователя страница 7

Страница: 7 / 73

Introduction

1.3 Open-source software

VersiCharge AC Wallbox IEC

Operating Instructions, 03/2021, A5E50366109-AA

1.3

Open-source software

Open-source software is used in the firmware of the product described. The open-source

software is provided free of charge. We are liable for the product described, including the

open-source software contained in it, pursuant to the conditions applicable to the product.

Siemens accepts no liability for the use of the open-source software over and above the

intended program sequence, or for any faults caused by modifications to the software.
For legal reasons, we are obliged to publish the license terms and copyright notices in the

original text. Please also read the information that is supplied with the product or made

available for download on the Siemens homepage (

https://siemens.com/versicharge

Содержание VersiCharge










































































Результаты поиска

Содержание VersiCharge

Отзывы:

Похожие инструкции для VersiCharge

Бренды по названию

Популярные бренды

Siemens VersiCharge, Руководство по эксплуатации

Результаты поиска

Содержание VersiCharge

Отзывы:

Похожие инструкции для VersiCharge

Бренды по названию

Популярные бренды