Siemens VersiCharge Скачать руководство пользователя страница 59

Страница: 59 / 73

Maintenance and service

8.2 Cleaning and maintenance

VersiCharge AC Wallbox IEC

Operating Instructions, 03/2021, A5E50366109-AA

Cleaning guidelines

•

Do not use solvents or corrosive or abrasive detergents.

•

Use a mild, non-corrosive cleaning agent, e.g. dishwashing detergent, even if heavily

soiled.

•

Wipe the charging station from the outside with a moist cloth and rub the station dry.

•

Deionized water is particularly suitable for cleaning the unit.

•

Do not scrape off stubborn dirt using hard objects.

•

Do not use any sharp-edged tools.

•

Soften paper stickers in advance for easy removal.

•

Make sure that water does not get underneath the cover of the charging socket or into the

charging plug.

To ensure optimum quality and functionality, clean all charging stations according to agreed

intervals.

Note

Use environmentally friendly cleaning agents approved for cleaning plastics (polycarbonate).

Note

Cleaning the interior of the charging station is not normally required for regular

maintenance. Only qualified personnel may clean the inside of the charging station if the

situation demands (e.g. due to a dusty environment).

Содержание VersiCharge










































































Результаты поиска

Содержание VersiCharge

Отзывы:

Похожие инструкции для VersiCharge

Бренды по названию

Популярные бренды

Siemens VersiCharge, Руководство по эксплуатации

Результаты поиска

Содержание VersiCharge

Отзывы:

Похожие инструкции для VersiCharge

Бренды по названию

Популярные бренды