Siemens VersiCharge Скачать руководство пользователя страница 50

Страница: 50 / 73

Operation

6.2 Charging

VersiCharge AC Wallbox IEC
Operating Instructions, 03/2021, A5E50366109-AA

DANGER

Risk of overheating and fire

Using unauthorized accessories increases the risk of fire due to overheating.
•

Only use a charging cable approved for the vehicle.

•

Do not use an extension to connect the charging station to the vehicle.

•

Adapter and adapter cable are not permitted.

CAUTION

Risk of accident

Ensure that the charging cable does not block any escape route or constitute a tripping

hazard. In this case, the cable becomes an obstacle that can lead to injuries. The cable could

also be ripped out from the anchoring and cause damage to the vehicle or the charging

station.

Basic procedure

Connect the vehicle and the charging unit using a suitable cable. For a Wallbox with

permanently connected cable, insert this cable into the socket of the electric vehicle. After

successful authentication, the charging process is started automatically by the vehicle and

displayed via the Status LED. You have the option of preselecting a time delay and viewing

the status via the VersiCharge app. After the charging process ends, the device switches to

"Ready" status (LED display (Page 19)).

Different models

The charging process is described for the socket version with type 2 charging port.
The procedure is largely identical for the following versions.
•

Fixed charging cables type 2

Possible deviations in the procedure:
•

Plugging and unplugging directly on the charging unit

•

Connector lock

Содержание VersiCharge










































































Результаты поиска

Содержание VersiCharge

Отзывы:

Похожие инструкции для VersiCharge

Бренды по названию

Популярные бренды

Siemens VersiCharge, Руководство по эксплуатации

Результаты поиска

Содержание VersiCharge

Отзывы:

Похожие инструкции для VersiCharge

Бренды по названию

Популярные бренды