8.2 VersiCharge Operation
Safety instructions during the charging process
D
• Do not kink or squeeze the charging cable. Do not draw the charging cable over sharp edges or hot surfaces.
• Do not use the charging station if damage or tampering is visible. If damage is visible, Inform the operator. Until damage is
repaired, keep away from the charging station and do not attempt to charge an EV.
• Grip the power plug/connector to disconnect from the charging unit. Do not remove the connector by pulling on the cable.
• Never touch the power plug/connector with wet hands.
• Do not connect or disconnect any cables during a thunderstorm.
Risk of overheating and fire
Unauthorized accessories should not be used with the VersiCharge due to risk of fire and/or overheating.
• DO NOT use a charging cable that is not approved for the vehicle.
• DO NOT use an extension to connect the charging station to the vehicle.
• DO NOT use an adapter or adapter cable.
8.2.1 Basic procedure
• Using the charger connector, gently insert the connector into the EV. Be sure not to force the connection or bend any pins
in the connector.
• Check the charger "Lock" light (see Figure 25-commercial chargers only), when lit, the front panel is locked and will not
begin charging. Pass a User RFID card in front of the reader to unlock and begin charging. The "Lock" light will be off.
RFID authentication is successful when the Charging Process Light flashes twice from the bottom up, and there is an
audible tone. RFID authentication is not successful when there are two audible tones.
• If RFID authentication is successful, charging will begin automatically.
• If delay is needed, press the Touch Sensitive button once for 2 hour delay, twice for 4 hour delay, 3 times for 6 hour delay
and four times for 8 hour delay. Once the delay is selected, charging will begin automatically after the delay countdown.
NOTE:
The delay function is not supported using the Touch Sensitive button if the charger is configured for OCPP
communication, or if RFID is enabled.
Set delay by pressing the
Touch Senstive button or by
using the mobile app.
CAUTION!
Risk of accident. Ensure that the charging cable does not block an exit or pose a
tripping hazard. Ensure the cable cannot be ripped out of the charging station.
DANGER
Risk of electric shock and fire.
Touching live parts may cause electric shock or even
death. Defective connectors or cables may cause fire.
42
VersiCharge™ AC Electric vehicle charging station