Siemens VDO EDM eco Release II, Руководство по эксплуатации, Страница: 87 / 104

EDM eco
Operating instructions
Unit settings
TU00-1404-0311020 © Siemens VDO Trading GmbH
35
E
d
it
io
n
11/
2003
En
gli
s
h
Entering/ Amending cost factors
You can use the EDM eco to calculate and display journey costs (-> 15).
1 Press the key and the key at the same time to switch to the unit
settings.
The first menu item 86(U6HW83 will be displayed automatically.
2 Select the
6\6W(6HW83 > 6HW836\6W( > &26W6HW83
(-
>
27) menu item
(-
>
31).
If PIN protection has already been activated, you will automatically be asked
to enter the system PIN number in the place indicated (-> 24).
3 In the
&26W6HW83
sub menu enter the required cost factors one after the other in
your national currency:
–
)8(/
- Consumption dependent costs (per litre of fuel)
–
G,67
- Costs dependent on wear and tear (cost per kilometre travelled)
–
W,Q( -
Time dependent costs (costs per hour of journey time).
Values are entered in the same way as PIN numbers (-> 24).
4 Confirm the individual entries by pressing the key and scroll to the
next value to be entered with the key.
5 After you have completed all entries, press the key until you return to the
normal display mode.