67 / 94
Siemens
TX-I/O PROFINET BIM V1.0
CM110564en_02
Building Technologies
Diagnostics
23.09.2010
2
Optional:
Exit by entering at the DOS prompt:
quit > return key
5.3.7
Alarm List
Command for displaying the alarm list.
This command can only be run during ongoing Profinet communication.
1
At the DOS prompt (PNBIM>) enter: alarmlist > return key
Shows the alarm list; for example:
2
Optional: Exit by entering at the DOS prompt: quit > return key
5.3.8
Device List
Command for displaying a TX-I/O module list for modules that are connected with
the Profinet BIM.
This command can only be run during ongoing Profinet communication.
1
At the DOS prompt (PNBIM) enter: devicelist > return key
Shows the device list; for example:
2
Optional: Exit by entering at the DOS prompt: quit > return key
Definition,
addition
Procedure
Definition,
addition
Procedure
Содержание TX-I/O
Страница 1: ...s TX I O TX I O PROFINET BIM V1 0 User manual CM110564en_02 23 09 2010 Building Technologies ...
Страница 90: ...90 94 Siemens TX I O PROFINET BIM V1 0 CM110564en_02 Building Technologies Hardware 23 09 2010 ...
Страница 93: ...93 94 Siemens TX I O PROFINET BIM V1 0 CM110564en_02 Building Technologies Index 23 09 2010 ...