Siemens TQ507DF3, Руководство пользователя

Страница: 75 / 212

Cleaning and servicing en
75
4.
Empty and clean the drip tray.
5.
Insert the drip tray and close the
door.
6.
Restart the service programme.
Using the milk system cleaning
programme
Rinse the milk system with water, if ne-
cessary. The rinsing process takes ap-
prox. 1 minute.
1.
Press ⁠.
2.
Use and to select "Cleaning
and care" and press ⁠.
3.
Use and to select "Milk sys-
tem" and press ⁠.
4.
To start the programme, press ⁠.
a
The display will guide you through
the programme.
5.
Remove and empty the milk con-
tainer.
6.
Clean the milk container, milk tube
and suction pipe.
7.
Fit the components and insert the
milk container.
8.
Place an empty glass under the out-
let system and press ⁠.
The milk system will now clean itself
automatically.
a
The program has ended and the ap-
pliance is ready for operation.
Tip: If you want to clean the milk sys-
tem particularly thoroughly, clean it reg-
ularly by hand.
→
"Cleaning the milk system", Page 72
Using the descaling programme
Run the descaling programme when
your appliance prompts you. The pro-
cess takes approx. 30 minutes.
Requirement: The brewing unit is
cleaned.
→
"Cleaning brewing unit", Page 73
1.
Press ⁠.
2.
Use and to select "Cleaning
and care" and press ⁠.
3.
Use and to select "Descale"
and press ⁠.
4.
To start the programme, press ⁠.
a
The display will guide you through
the programme.
5.
Empty and insert the drip tray.
6.
Remove and empty the milk con-
tainer.
7.
Clean the milk container, milk tube
and suction pipe.
8.
Fit the components and insert the
milk container.
9.
If there is a water filter, remove it.
10.
Press ⁠.
11.
Empty the water tank.
12.
Fill a container with 0.5 l lukewarm
water.
13.
Add a Siemens descaling tablet to
the water and stir until the tablet is
fully dissolved.
14.
Pour the descaling solution into the
water tank up to the calc mark and
press ⁠.
15.
Place the empty container under the
outlet system and press ⁠.
a
The descaling programme will run
for approx. 20 minutes.
16.
Rinse the water tank.
17.
Press ⁠.
18.
If there is a water filter, insert the wa-
ter filter.
→ "Insert water filter", Page 64
19.
Press ⁠.
20.
Fill the tank with fresh water up to
the "max" mark.
21.
Press ⁠.
a
The descaling programme takes ap-
prox. 1 minute and rinses the appli-
ance.
22.
Empty and insert the drip tray.
23.
Remove and empty the milk con-
tainer.
24.
Clean the milk container, milk tube
and suction pipe.