Wireless Transceiver Tool (TLX) (For WFLN Version 1)
Viewing Node Configuration (CONFIG)
Use the CONFIG command to view the node configuration summary, which includes the node’s firmware
version and EUID.
To view the node configuration summary:
1. Type one of the following:
•
CONFIG TLX
•
CONFIG FPX
•
CONFIG FLNX
x
(where
x
is the FLN device address (drop))
•
CONFIG FLNX
y
(where
y
is the FLNX EUID)
2. Press
ENTER
.
The following example shows FPX configuration data.
>CONFIG FPX
----- Node Configuration -----
FW VERSION ID: 08
MODE: FPX
EUID: 0x000D6F0000055F9B
RF CHAN: 16
PAN ID: 0x2FE5
GROUP ID: 1
RF POWER: -1
ROUTE: NO
FLN ADDR: N/A
FLN BAUD: 4800
Reserved for Future Use
Routes Wireless Messages for Other Devices?
Firmware Version
WLAN0038R1
Figure 4.
Example Results from the TLX CONFIG Command.
Revision Date: June 20, 2006
11
CONFIDENTIAL: For Internal Use Only
Siemens Building Technologies, Inc.
