Siemens TIM 1531 IRC Скачать руководство пользователя страница 260

Страница: 260 / 338

Block library TeleControl ST7

5.7 Master copies

TIM 1531 IRC

260

Operating Instructions, 02/2018, C79000-G8976-C468-02

5.7.5.2

DB BComData

Validity

S7-400

Function

Instance data block for the communication block FB BCom. The instance DB represents the

communication mailbox and contains the following, among other things:

●

The receive mailbox (ReceiveBuffer)

●

A send mailbox (SendBuffer)

It also contains central data required to control and manage the PBK connection that runs

via this mailbox.
The data block is required in every CPU in which FB BCom is used. If the CPU has several

PBK connections the DB is required more than once.
DB BComData is automatically generated in the required length preset with the connection

specific data and then saved in the block directory of the CPU.

5.7.6

Communication blocks PCom (CPU300)

5.7.6.1

FB PCom

Validity

S7-300 CPU without partyline
FB PCom is used only with communication via the P bus. This affects the communication

between a TIM and a CPU with P bus.

Function

Auxiliary block for FC BasicTask_P for processing a communication mailbox of the type DB

PComData using the SFCs WR_REC and RD_REC.
Received frames are also distributed immediately to the receive objects responsible in the

CPU. To do this FB PCom calls FC Distribute as an auxiliary block.

5.7.6.2

DB PComData

Instance data block for the communication block FB PCom. The instance DB makes the

communication mailbox available and contains the following:

●

The receive mailbox (ReceiveBuffer)

●

A send mailbox (SendBuffer)

Содержание TIM 1531 IRC



















































































































































































































































































































































Результаты поиска

Содержание TIM 1531 IRC

Отзывы:

Siemens TIM 1531 IRC, Руководство по эксплуатации, Страница: 260 / 338

Результаты поиска

Содержание TIM 1531 IRC

Отзывы: