Siemens TI355F09DE, Инструкция по эксплуатации

Страница: 48 / 136

en
Service programme
48
Starting Calc’nClean
Calc’nClean service programme
Duration: approx. 40 minutes
1.
Press and hold the
calc’nClean
button for approx. 5 seconds.
(
symbol lights up.
2.
Open the door, remove the drip tray
and coffee grounds container and
empty.
3.
Remove and clean the brewing unit.
4.
Place a Siemens cleaning tablet in
the brewing unit and re-insert the
unit.
5.
Re-insert the drip tray and coffee
grounds container and close the
door.
)
symbol lights up.
6.
Remove the water filter (if there is
one).
7.
Pour 0.5 litres of lukewarm water
into the empty water tank up to the
mark and dissolve a Siemens
descaling tablet in it.
8.
Re-insert the water tank and place a
large container (approx. 1 litre)
under the outlet system.
9.
calc’nClean
flashes, touch
calc’nClean
.
The programme starts, cleans and
descales the appliance.
calc’nClean
pulses. Duration approx. 20 minutes.
(
symbol lights up.
10.
Empty the container, open the door,
empty the drip tray and re-insert.
11.
Close the door and place a
container under the outlet system.
)
symbol lights up.
12.
Clean the water tank and replace the
water filter (if removed).
~
Fig.
'
13.
Fill with fresh, still water up to the
"max" mark. Place the container
under the outlet system again.
14. calc’nClean
flashes, touch
calc’nClean
.
The programme starts and then cleans
and rinses the appliance.
calc’nClean
pulses.
(
symbol lights up.
15.
Empty, clean and re-insert the drip
tray and coffee grounds container.
The programme has finished. The
appliance is ready for use again.