Siemens TI 303, Инструкция по эксплуатации

Страница: 39 / 104

Operating the appliance
en
39
Setting the grinding level
This appliance features an adjustable
grinder. This enables the grinding level
of the coffee to be individually changed.
:
Warning
Risk of injury!
Do not reach into the grinding unit.
Caution!
The appliance may be damaged! Only
adjust the grinding level when the
grinder is running!
When the grinder is in operation, use
the rotary selector
):
to set the
grinding level.
■
Finer grinding level: turn
anticlockwise. (Fig. a)
■
Coarser grinding level: turn
clockwise. (Fig. b)
Notes
■
The new setting will not become
apparent until the second cup of
coffee.
■
For dark roast coffee beans, choose
a finer grinding level; for lighter
beans, choose a coarser grinding
level.
Water filter
Water fi lter
~
Fig.
&
A water filter lessens limescale
deposits, reduces impurities in water
and improves the taste of the coffee.
Water filters are available from retailers
or from customer service.
Inserting or replacing a water filter
A new water filter must be rinsed before
it can be used.
The appliance is switched on. The water
tank has been filled.
1.
Press and hold
%
and
calc’nClean
for at least 3 seconds.
2.
Touch the “
V
” button
cappuccino
repeatedly until "W. hardness"
appears.
3.
Confirm by pressing the “ok” button
latte macchiato
.
4.
Press the “
V
” button
cappuccino
repeatedly until "Water filter"
appears.
5.
Confirm by pressing the “ok” button
latte macchiato
.
The display shows "Filter act.".
6.
Immerse the water filter (opening up)
in a container filled with water until
no more air bubbles rise to the
surface.
7.
Then press the water filter firmly into
the empty water tank.
8.
Fill the water tank with water up to
the "max" marking.
9.
Place a container with a capacity of
1.0 litre under the outlet.
10.
Touch the “ok” button
latte
macchiato
to save the setting and
start rinsing.
11.
Touch the “
¾
” button
caffe crema
to
exit the menu.
12.
Then empty the container. The
appliance is ready for use again.
Removing the water filter
If the water filter has been removed and
no new one inserted, please select the
appropriate water hardness as
described in the section "Settings -
Setting the water hardness".
D E