s
Aluminum and Copper Wire Connector
Bornes de alimentación y cuerpo múltiples
Bornes de répartition
For Use With Frame
NG
Para Usar Con Caja Base NG
Installation Instructions / Instructivo de Instalación
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
2TA3NG750 / 3VL9775-4TG21
4 x
5/16 – 18 UNC x 3.0”
6 x
5/16 – 18 UNC x 2.0”
3TA4NG500H / 3VL9750-4TK31
2TA4NG500 / 3VL9750-4TH21
4 x
5/16 -18 UNC x 3.0”
Euro order. No.
U.S. Cat. No.
3VL9750-4TH.1
3VL9750-4TH61
3VL9750-4TK31
3VL9775-4TG.1
Item: .TA4NG500
3TC4NG500
3TA4NG500H
.TA3NG750
1/4“
5/16“
Cal. ISO 6789
3TA3NG750 / 3VL9775-4TG31
6 x
5/16 – 18 UNC x 3.0”
3TA4NG500 / 3VL9750-4TH31
6 x
5/16 – 18 UNC x 3.0”
NOTE - These instructions do not purport to cover all details or variations in equipment, or to provide for every possible contingency to be met
in connection with installation, operation or maintenance. Should further information be desired or should particular problems arise, which are
not covered sufficiently for the purchaser’s purposes, the matter should be referred to the local Siemens sales office. The contents of this
instruction manual shall not become part of or modify any prior or existing agreement, commitment or relationship. The sales contract contains
the entire obligation of Siemens. The warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered trademarks of Siemens AG or Siemens Industry, Inc. The
remaining trademarks in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the
owner.
GWA 4NEB 179 6877-10 DS 04
Bestell-Nr. / Order No.: 3ZX1012-0VL68-5AA6
Last update: 25 November 2013
4TA4NG500 / 3VL9750-4TH41
8 x
5/16 – 18 UNC x 3.0”
