Siemens Synco RMZ792 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 52

background image

13/52

Building Technologies

Bus operator unit RMZ792

CE1P3113en

HVAC Products

2 Operation

03.04.2006

Level Icon

Description

Password level

The password level displays additional menus and data-
points for configuring and commissioning the bus opera-
tor unit. The password level is protected by a password to
prevent unauthorized access. The unit comes standard
with number “7” as the password.

From this level, the password level of the bus users
cannot be accessed; the setting only acts locally.

With the exception of the info level, operation is structured in the form of a menu tree.
Individual menus or operating lines are enabled depending on the access level. The
higher access level always displays all menus and operating lines of lower access
levels also; the password level shows the entire menu tree. The active level is indicated
by an appropriate symbol at top left.
Using the INFO button, explanations relating to the menus and the individual datapoints
can be displayed. The information is displayed as long as the button is kept depressed.

Switching to the info level:
1.  Press the ESC button repeatedly until the start page reappears.
2.  Press the INFO button or turn the OK knob to change to the info level.
3.  To navigate within the info pages, press the INFO button repeatedly

or

turn the OK

knob.

Switching to the user level:
1. Selecting the start page: Press the ESC button repeatedly until the start page

reappears.

2. Press the OK knob.
3. If the user level is password-protected, the

Access levels

menu appears now.

4.  Select the User level by turning the OK knob.
5.  Enter the password required for the respective access level.
6.  Press the OK knob to confirm the password.

Switching to the service level or password level:
1. Selecting the start page: Press the button repeatedly until the start page reappears.
2. Press the OK knob and the ESC button simultaneously. The

Access levels

menu

appears.

3. Select the required access level by turning the OK knob and confirm by pressing

the knob.

4. If necessary, enter the password required for the respective access level.
5. Press the OK knob to confirm the password.

If there is no operating action for 30 minutes, the unit will automatically change to the
start page and the user level.

2.4

Menu tree

The menu tree of the bus operator unit is divided into 3 types of menus:
1.

Info:

Values cannot be changed. The pages are on the info level and cannot be pro-
tected by a password.

2.

Devices:

Device list with all bus users. The menu tree of the respective bus user can be
opened via the user’s device name.
Alternatively, the most important and most frequently used datapoints of bus users
can be accessed via user-defined favorite menus.

Switching between
operating levels

«
...
11
12
13
14
15
...
»

Содержание Synco RMZ792





















































Отзывы:

Нет отзывов

Похожие инструкции для Synco RMZ792

ACS850-04 series

Бренд: ABB Страницы: 296

Бренд: ABB Страницы: 320

Бренд: ABB Страницы: 50

Бренд: ABB Страницы: 56

Бренд: Jafar Страницы: 10

Бренд: CALEFFI Страницы: 12

QuickSetter+ 132 Series

Бренд: CALEFFI Страницы: 5

Бренд: Kamstrup Страницы: 36

Бренд: JFA Electronicos Страницы: 29

Бренд: Union Instruments Страницы: 63

disklavier DKC-850

Бренд: Yamaha Страницы: 2

Бренд: Daihan Scientific Страницы: 11

Бренд: Rational Страницы: 140

Бренд: IMG STAGELINE Страницы: 14

Бренд: VAT Страницы: 77

Synergy SGY-101

Бренд: Fairford Страницы: 20

Бренд: Varian Страницы: 37

Бренд: Burkert Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды