Siemens Synco 900 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 88

background image

51/88

Siemens Synco

900

CE1C2707en

Building Technologies

Commissioning the system

05.07.2007

Connect outputs

Connect the output for heat demand DC 0..10 V

Inform the central apartment unit that you want to use universal out-
put U of the RRV912 heating circuit controller as a DC 0..10 V heat
demand output:

Main menu > Commissioning > RF connections > Outputs >
Heat demand DC 0..10 V > Connect device:

Confirm subentry “Connect device“ by pressing the

Menu/ok

button.

To make the connection, you is prompted to press the binding button
on the device to be connected.

Select universal output U with the channel selection button (CH) on
the heating circuit controller. The LED of the selected channel blinks.
If the selected channel is not yet connected, the connection LED
flashes.
Now, press the multifunction button on the heating circuit controller.
The LED lights up green. When it starts blinking, you can release the
binding button.
A successful connection is shown on the display of the central apart-
ment unit and be confirmed with a beep. Close the binding process
by pressing the

Menu/ok

button.

Connect the heat demand relay

Inform the central apartment unit that you want to use a universal
relay output Qx of a heating circuit controller as a heat demand out-
put:

Main menu > Commissioning > RF connections > Outputs >
Heat demand relay

> Connect device:

Confirm subentry “Connect device“ by pressing the

Menu/ok

button.

To make the connection, you is prompted to press the binding button
on the device to be connected.

Select a universal relay output Qx with the channel selection button
(CH) on the heating circuit controller. The LED of the selected chan-
nel blinks. If the selected channel is not yet connected, the connec-
tion LED flashes.
Now, press the multifunction button on the heating circuit controller.
The LED lights up green. When it starts blinking, you can release the
binding button.
A successful connection is shown on the display of the central apart-
ment unit and be confirmed with a beep. Close the binding process
by pressing the

Menu/ok

button.

«
...
49
50
51
52
53
...
»

Содержание Synco 900

























































































Отзывы:

Нет отзывов

Похожие инструкции для Synco 900

Бренд: Easy Heat Страницы: 4

Бренд: halstrup-walcher Страницы: 39

Бренд: Lawler Страницы: 4

Бренд: QTP Страницы: 2

Бренд: Decagon Страницы: 27

Бренд: Frico Страницы: 12

Бренд: Linear Technology Страницы: 32

Бренд: Rheem Страницы: 2

GLOFA G7M-DR20U

Бренд: LS Industrial Systems Страницы: 367

Бренд: PPI Страницы: 27

Бренд: Wasp Страницы: 20

Бренд: SUPMEA Страницы: 40

Бренд: Seitron Страницы: 2

Бренд: Samson Страницы: 32

SoundLinQ SL2xD2

Бренд: Vais Technology Страницы: 21

Бренд: Zapi Страницы: 36

Бренд: Samson Страницы: 64

Бренд: SystemAir Страницы: 4

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды