User Menus Via the Keypad
98
Siemens Building Technologies
Fire Safety & Security Products
09.2008
Select Events for SMS notification within SMS Events menu:
1.
Scroll to the SMS EVENTS option and press
SELECT.
2.
Select EDIT. Using the up/down arrow keys,
scroll to the appropriate registered number
and press SELECT.
3.
Using the up/down arrow keys, scroll to the
REPORTED EVENTS and press SELECT.
4.
Scroll and toggle ENABLED for each Event
notification desired.
Î
Events display preceded by an asterisk.
5.
Press BACK to exit the SMS EVENTS
menu.
12.12.2 SMS Control
Depending on the SMS authentication chosen by the installation engineer, the
user’s mode of SMS may vary.
If the system SMS Authentication is set to the SMS PIN Code or Caller ID, it is
necessary to set up SMS Control:
1.
Scroll to the SMS CONTROL option and press SELECT. The following
configuration options are available:
–
SMS CALLER ID:
Provide phone number
(Requires three-digit country code prefix)
–
SMS PIN CODE:
Provide pin number
–
Delete:
Remove phone number as
needed
2.
Press BACK to exit the SMS SETUP menu.
NOTE
Beyond User Type, Engineer settings allow specific rights for functionality to be granted to each user.
If a function explained herein does not appear on User keypad menus, the user does not have
permission for that functionality. Consult with authorised installation Engineer for appropriate rights
and settings.
...SMS EVENTS...
EXIT
SELECT
...EDIT...
EXIT
SELECT
...353123123...
BACK
SELECT
..REPORTED EVENTS..
BACK
SELECT
...ALARMS...
BACK
SELECT
...SMS CONTROL...
EXIT
SELECT
...SMS CALLER ID...
EXIT
SELECT
