Siemens SPC4000, Руководство по установке и настройке

Страница: 93 / 129

User Menus Via the Keypad
93
Siemens Building Technologies
Fire Safety & Security Products 09.2008
12.7 Performing a Walk Test
A walk test ensures that the sensors are operating correctly on the SPC.
To perform a walk test:
1. Enter a valid user code.
2. Using the up/down arrow keys, scroll to the
MENUS option and press SELECT.
3. Scroll to the TEST option and press
SELECT.
Î
The display indicates the number of zones
to be tested on the system with the text ‘TO
TEST XX’ (where XX is the number of valid
walk test zones).
Î
Valid walk test zones are defined as all zone
types with the exception of Panic zones,
Fire zones, Fire Exit zones, and Holdup
zones. Do NOT activate these zone types
during a walk test.
4. Locate the sensor on the first zone and activate it (open the door or window).
Î
The Keypad buzzer sounds continuously for approximately two seconds to
indicate that the zone activation has been detected and the number of zones
left to test (displayed on the Keypad) decreases.
5. Continue with the remaining zones on the system until all zones have been
tested. If a zone activation does not get acknowledged by the system, check
the wiring of the sensor and/or replace with another sensor if necessary.
12.8 Viewing the Event Log
The most recent events on the system can be viewed by selecting the EVENT
LOG option. The most recent events are displayed on the bottom line of the display
and all previous events are displayed for one second in turn.
To view the event log on the Keypad:
1. Enter a valid user code.
2. Using the up/down arrow keys, scroll to the
MENUS option and press SELECT.
3. Scroll to the EVENT LOG option and press
SELECT.
Î
The Keypad displays the most recent event
logged on the system on the bottom line,
and all previous events are displayed for
one second in turn.
4. To view an event from a particular date,
enter the date with the numeric keys.
...MENUS...
EXIT
SELECT
...TEST...
EXIT
SELECT
...WALK TEST...
BACK ENTER
TO TEST 1
BACK
SELECT
...MENUS...
EXIT
SELECT
...EVENT LOG...
EXIT
SELECT
08 APR 08 12:30
ENABLED