Engineer Programming Via the Keypad
51
Siemens Building Technologies
Fire Safety & Security Products
09.2008
10.3.9 Bell on 1st
To enable or disable the Bell on 1st feature:
1.
Scroll to the BELL ON 1ST programming
option.
2.
Press SELECT.
3.
Toggle between ENABLED and DISABLED for
preferred option.
4.
Press SAVE to update the setting.
10.3.10 Bell on Failed to Set (FTS)
To enable or disable the Bell on Failed to Set (FTS) feature:
1.
Scroll to the BELL ON FTS programming
option.
2.
Press SELECT.
3.
Toggle between ENABLED and DISABLED for
preferred option.
4.
Press SAVE to update the setting.
10.3.11 Strobe on Failed to Set (FTS)
To enable or disable the Strobe on Failed to Set (FTS) feature:
1.
Scroll to the STROBE ON FTS programming
option.
2.
Press SELECT.
3.
Toggle between ENABLED and DISABLED for
preferred option.
4.
Press SAVE to update the setting.
10.3.12 Code Digits
To program the number of code digits:
1.
Scroll to the CODE DIGITS programming
option.
2.
Press SELECT.
3.
Scroll to the preferred number of code digits (4
through 8).
4.
Press SAVE to update the setting.
10.3.13 Open Zones
To enable or disable the open zones feature:
1.
Scroll to the OPEN ZONES programming
option.
2.
Press SELECT.
3.
Toggle between ENABLED and DISABLED for
preferred option.
4.
Press SAVE to update the setting.
...BELL ON 1ST...
BACK
SELECT
ENABLED
BACK
SAVE
...BELL ON FTS...
BACK
SELECT
ENABLED
BACK
SAVE
...STROBE ON FTS...
BACK
SELECT
ENABLED
BACK
SAVE
...OPEN ZONES...
BACK
SELECT
ENABLED
BACK
SAVE
...CODE DIGITS...
BACK
SELECT
...4 DIGITS...
BACK
SAVE
