manualshive.com logo in svg

Siemens SOMATOM Spirit, Руководство оператора, Страница: 116 / 484

Поделиться
Скачать
Siemens SOMATOM Spirit Скачать руководство пользователя страница 116

0.0

0.0

Software Related Safety Information

Safety

A.4-32

SOMATOM Spirit

0.0

Storage commitment

A.4

The work status of a data object indicates the processing stage 
of patient and examination data. This status is indicated as an 
abbreviation in every list entry in the content area.

A.4

A.4

A.4

CAUTION

A.4

System that does not use storage commitment only report back 
to the sending system when the data has been fully received 
(flags A and S). A user or an auto-delete mechanism at the send-
ing system might subsequently delete the sent data. However, 
this response dose not imply that the data has already been 
stored at the receiving system!

A.4

In the case that the receiving system cannot store the data, 
the data might irrevocably be lost.

A.4

✧

Double-check that the data is actually stored on the receiv-
ing system. Use storage commitment whenever it is sup-
ported by the sending and receiving systems.

Содержание SOMATOM Spirit





































































































































































































































































































































































































































































































Отзывы:

Нет отзывов