Siemens SN53HS60AE, Инструкция по эксплуатации

Страница: 15 / 64

Set up and connectNL
Drinking water connection
Connect the device to a drinking
water connection.
Install drinking water connection
NoteWhen you replace the
appliance, you must use a new water
supply hose.
1.
The necessary steps can be found in
the supplied installation instructions.
2.
Connect the device to the drinking
water connection using the
enclosed parts.
The "technical data"
→ Page 61consider.
3.
Make sure that the drinking water
connection is not kinked, crushed
or entangled.
Electrical connection
Connect the device to the mains.
Connecting the appliance electrically
Clues
†Take the "safety rules"
→ Page 5heed.
†Only connect the device
on an AC voltage of 220 - 240 V
and 50 Hz or 60 Hz.
†Please note that the wa-
The protection system only works
when the device is supplied with
power.
1.
Connect the appliance plug of the
connecting cable to the appliance.
2.
Plug the appliance into a mains
socket in the vicinity of the
appliance.
The connection data of the device
can be found on the type plate.
3.
Check the plug for tightness.
15