NLCleaning and maintenance
When the Machine Cleaning indicator on
the control panel lights up or the display
prompts you to do so, perform the
Machine Cleaning without any dishes.
After you have performed Machine
Cleaning, the indicator will go out. If the
device does not have a reminder
function, we recommend that you
perform the machine cleaning every 2
months.
3.
Place the machine care product in
the interior of the machine.
Only use machine care products
specially designed for dishwashers.
4.
Pour the machine cleaner into the
detergent dispenser until it is
completely filled.
Do not put any additional machine
cleaner into the interior of the
appliance.
Perform machine cleaning
When the Machine Cleaning indicator
on the control panel lights up or the
display prompts you to do so, run the
Machine Cleaning program.
5.
impressions.
6.
impressions.
aMachine cleaning is in progress. a
Once the program is complete,
the indicator for Machine Cleaning goes
out.
Comments
†Run the Machine cleaning program
went out without any crockery.
†Use only for dishwashing
suitable machine care products
and machine cleaners.
†Make sure that there are no aluminum
um objects, such as grease filters
from extractor hoods or aluminum
pans, are in the washing area of
the appliance.
†If you do not complete the Machine Cleaning
After 3 washing cycles, the indicator
for Machine cleaning will go out
automatically.
†In order to obtain the optimum cleaning performance
genes, pay attention to the correct
placement of the cleaners.
†Take the safety precautions
on the packaging of machine care
products and machine cleaners.
Sieving System
The sieve system filters coarse
contaminants from the flushing circuit.
3
2
1
1
microsieve
fine sieve
coarse sieve
2
3
Cleaning sieves
1.
Coarse contaminants in the interior
damp cloth
Contaminants from the wash water
can clog the sieves.
room with a
remove.
2.
Clean the seven.
1.
Check the sieves for food residues
after each wash.
46
