NLHome Connect
Basic setting
Factory setting
Display text
re:
Choise
Description
Start with
Y:ES
Confirm with
Reset changed settings to
factory condition.
Initial commissioning
settings must be specified.
1
Factory setting (may differ depending on the device type)
Change basic settings
In order to use Home Connect, you must
first establish a connection to the WLAN
home network (Wi-Fi
1
) and can be
configured with the Home Connect app.
†
†Device with WLAN home network
connect work (Wi-Fi), page 43 The
Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
1.
Press.
2.
Approx. 3 seconds on
to access the basic settings.
Busy-
aThe display shows H:xx
to give.
aThe display shows
reflected
to give.
3.
Just as often on
until the display shows the desired
setting.
to press
Tips
†Take the supplied document
of Home Connect. †Also take
the directions
the Home Connect app.
4.
Press or repeatedly until the display
shows the desired value.
You can change multiple settings.
Remark:Observe the safety
instructions in these operating
instructions and ensure that they are
also observed when you operate the
appliance via the Home Connect app.
5.
To save the settings, press . for
about 3 seconds
to press.
huh
huh
uncle Connect
uncle Connect
huh
d
uncle Connect
this device is suitable for network
know. Connect your appliance to a
mobile terminal device to be able to
operate functions via the Home
Connect app.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information on this can be
found at: www.home-connect.com.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
42